Knowledge
Market Development of Metal Powder Injection Molding (MIM) Industry
Introduction to MIM Metal powder injection molding (MIM) is a new type of "near net forming" technology for parts that introduces modern plastic injection molding technology into the field of powder metallurgy. It integrates multiple disciplines such as plastic molding...
Development of Micro Metal Injection Molding in Japan
Micro Metal Injection Molding (MIM) technology in Japan has developed very maturely and occupies an important position in the global market. Metal Injection Molding (MIM) is a new type of "near net forming" technology for parts that introduces modern plastic...
Well-Known Metal Powder Metallurgy Companies
Metal powder refers to a group of metal particles with a size of less than 1mm. It includes single metal powder, alloy powder and certain refractory compound powders with metallic properties, which are the main raw materials for powder metallurgy....
Analysis of Sintered Cemented Carbide Waste and Causes
Cemented carbide is a powder metallurgy product made of tungsten carbide micron powder of high hardness refractory metal as the main component, cobalt or nickel, molybdenum as binder, sintered in a vacuum furnace or hydrogen reduction furnace. Sintering is a...
Micro-Machining Service——turn Your Subtle Imagination into Parts
Micromachining services refer to a precision manufacturing technology for extremely small parts and products. It uses mechanical micro tools with geometrically defined cutting edges to manufacture very small parts, usually in the micron range. Applications of micromachining include electronic tools,...
Processing Technology of Advanced Ceramics After Molding
The processing technology of ceramic blanks after molding (dry pressing, injection, extrusion, isostatic pressing, gel, etc.) is called blank repair. At present, the formulations and molding processes of various ceramics will produce some redundant parts, such as the tailings of...
Ceramic Metal Processing Cutting Tools
From tableware to home bathroom, ceramics are everywhere in our lives. But have you ever thought that ceramics can also be used in cutting tools? What is ceramic? The combination of metal or non-metal with oxygen (O), nitrogen (N), carbon...
Comparison of Metal Forming Process Cost Analysis
Metal Injection Molding (MIM) is a new hardware processing method that uses injection molding to produce high-melting-point metals with new processes, new technologies, and multi-process processes. Dahong Company has mastered the core technology of MIM: material preparation, degreasing, and sintering...
Application of Titanium Powder Metallurgy Structural Alloy Products Abroad
Titanium powder metallurgy technology began in the early 1950s, but it was not until the 1970s that a significant breakthrough was made. Since then, developed countries around the world have invested a lot of effort in researching this technology and...